Are Land Clearing Leads Worth Buying?
An honest answer from a company that sells them. The arithmetic to run first, when leads work, when they do not, and four questions to ask any lead…
Why every published price per acre is wrong, and the method contractors actually use: build a real day rate, estimate the days, charge mobilization, hold a minimum.
Search this question and you will find a dozen articles confidently quoting a price per acre. Ignore all of them. Anyone publishing a national number for land clearing has either never quoted a job or is guessing, because the same acre can differ by a factor of ten depending on what is standing on it.
What follows is the method contractors actually use, and the variables that move the number. You will have to plug in your own costs, because your costs are the only ones that matter.
Most experienced contractors quote per acre to the customer and calculate in machine days internally. Those are different activities and confusing them is where money gets lost.
The internal calculation is simple:
Your day rate x the number of days the job will take + mobilization = your price.
Everything hard is in that middle term. Estimating days is the skill. The day rate is arithmetic.
Not what the guy down the road charges. Yours. Add up:
The number that comes out is the floor. If a job does not clear it, walking away is the profitable decision.
Here is the part most articles will not give you. These are the day rate ranges we see in practice, across our own companies and the jobs that move through our subcontract board. They are rates for a machine and an operator for a working day, not a price per acre.
| Machine | Typical day rate |
|---|---|
| Skid steer mulcher 90+ HP, material to roughly 10 in |
$1,800 to $2,500 |
| Midsize mulcher 150+ HP, material to roughly 16 in |
$2,500 to $3,000 |
| Dedicated mulcher 300+ HP, material to roughly 30 in |
$3,000 and up |
Four things to read alongside those numbers.
If your own cost calculation lands well above these ranges, one of two things is true. Either your market genuinely pays more, in which case charge it, or your utilisation is too low and you are spreading a machine payment over too few working days. The second one is far more common, and no amount of quoting fixes it. Filling the calendar does, which is what subcontract hours are useful for.
If you land well below them, check that you have actually included your own labor and a profit line rather than paying yourself with whatever survives.
In rough order of impact:
The single biggest factor. An acre of light scrub and saplings might be a few hours. An acre of mature hardwood at 16 inches and up can be a multi-day job with the same machine. Ask for photos before you quote anything, and if the customer says “just some brush”, go and look.
Every mulching head has a diameter limit. As a rough guide, a skid steer mulcher in the 90 plus horsepower range handles material up to around 10 inches, a midsize machine around 150 horsepower handles up to about 16, and a dedicated mulcher at 300 plus horsepower handles up to roughly 30. Anything above your machine’s limit is not slow, it is a different job requiring different equipment.
If you are weighing up which machine to run in the first place, see what size mulcher you actually need.
Slope, rock, wet ground and hidden stumps all slow production and increase wear. Wet ground can double a timeline or stop it entirely.
Mulched in place is the fastest. Grubbing stumps is slower. Hauling debris off site is slower again and introduces disposal cost. Clear and grub to a flat, buildable finish is a different price to knocking down brush, and the customer often does not know there is a difference. Spell it out in the quote.
Structures, fences, power lines and septic fields all mean slower, more careful work. A tight lot with a house on it is not the same acre as an open field.
Moving equipment costs real money, especially anything that needs a lowboy. Small skid steer work often absorbs it into the day rate. Larger machines should charge it as a line item.
The mistake is eating mobilization on a one day job an hour away. Two hours of travel each way plus loading is most of a working day gone, and it was not in the price.
Have one and hold it. An eight hour minimum is standard across most of the trade, including on subcontract work. If a job finishes in four hours you still cannot sell the other four, because it is already gone.
If you have nothing to compare against, look at how work is actually scoped rather than at articles. On our subcontract board every job lists the acreage, the machine hours allocated, the machine class required and the material size limit. That is a useful reference for how many hours a given acreage and machine combination is expected to take, regardless of whether you ever bid one.
Three habits that prevent most disputes:
If you would rather not do that arithmetic by hand, our land clearing bid calculator does it. Put in your machine, your cost per hour, your overhead and the ground you are looking at, and it returns the day rate and the per acre number, plus where that lands against what the market pays.
There is no honest price per acre for land clearing, which is why nobody who quotes one for the whole country should be trusted with your pricing.
Know your day rate to the dollar, get good at estimating how many days the ground in front of you will take, charge for moving the machine, hold a minimum, and write scope by finish state. Do that and the per acre number takes care of itself, job by job.
One variable sits upstream of all of this: whether the roots have to come out. That decides the method before it decides the price, and it is covered in forestry mulching vs traditional land clearing.
An honest answer from a company that sells them. The arithmetic to run first, when leads work, when they do not, and four questions to ask any lead…
Who hires land clearing subs, what to have ready before you call, how the work is priced, and the five questions to ask before you commit a machine…
Skid steer, midsize or dedicated. What each class can handle, what they earn per day, and the utilisation question that decides it more than capability does.
Real jobs posted by property owners, and subcontract work where we hold the contract and you run the machine. No account needed to look.